Description:

Segregates competition lanes and eliminates any turbulence ( by the rotation of individual floats) which may pass from one lane to another when swimmers are racing.

Features:

• High-Quality PP disks with additives resistant to chemicals and weather agents.
• Disk diameter 1 00 mm. (10 per metre).
• Disks designed to reduce turbulence.
• Assembled on SS316 wire rope, dia 6 mm (Plastic Rope as optional).
• 4 colours: blue, red, yellow and green according to FINA rules.

Description:

Anchor cup in stainless steel with hinged hook retaining arm lane rope has been connected with this cup.

Features:

• Flat above deck option also available (as per picture).
• Electropolished 316 stainless steel.
• Square flange 80×80 mm.
• Plate for securing the lane.
• Supplied with brackets for improved installation.

Description:

Situated 5m from each end of the pool, are a line of flags crossing the water to warn backstroke swimmers that they are nearing the end of the pool so that they can prepare for their turn. Made with a pole of 48.3mm dia.

Features:

• 2 x SS316 Back Stroke poles of FINA regulation height 2m.
• 1 x Back Stroke flags & ropes.
• 2 x Deck pole anchors.
• Three sizes available to suit 13m, 21 m,& 25m wide pool. Custom sizes also available with adequate notice.
• Custom flag printing available to suit your pool or club with adequate notice.

Description:

Situated 5 metres from one end of the pool, are a line of floats crossing the water to inform swimmers that the race is abandoned. Made with a pole of 48.3 mm dia and supplied with hooks on the ends for attaching ropes or snap-hooks.

Features:

• 2 x SS316 false start poles of FINA regulation height 2 Mtr.
• I x false start rope & fittings.
• Three sizes available to suit 13m, 21m & 25m wide pool. Custom sizes also available with adequate notice.
• 2 x deck pole anchors.

Features:

• XL Capacity float lane roller made from SS316 pipes comes with heavy duty, non-marking and locking casters can swivel 360o and easy to maneuver.
• Capable to hold 6 float lane of 25mtr long or 3 float lane rope of 50mtr long.

Features:

• Frame made of SS316, with a 43mm / 38mm dia tubing.
• The threads, seats are made of plastic.
• Base from SS316 with wheels.

Description:

The chemical dosing unit has been designed for installation in the pool’s return line for use with slow dissolving Tri-chlorine or Bromine tablets. The quantity of sanitizer is quickly adjusted to give the required residual by way of the easy to use inlet valve. To avoid the build-up of gasses being trapped inside the feeder when the pump is shut off, it must be installed above water level and below the filter outlet. The manufacturer strongly recommends the installation of a non-return valve to protect the plant room from chemical attack, should the situation arise where water siphons back through the system.

Features:

• Connection 1.5″ Screw thread.
• Max pressure 4kg/cm².
• Max capacity 5kg.
• Max dosage Chlorine – 35gr/hr.
• Bromine 2gr/hr.
• Recommended Chlorine 20-80m³.
• Recommended Pool Size Bromine 4-50m³.

Description

The UV-C radiation inactivates bacteria, viruses and other microorganisms and stops them from multiplying.The device is able to reduce the chlorine concentration upto 50-80%.

Features:

• Timer function that indicates the remaining lifetime of the lamp.
• A built-in electronic ballast to ensure an efficient and stable power supply.
• Up to 35% more UV-C yield as a result of reflection by the stainless steel reactor.
• 316L stainless steel housing.
• Easy to install and easy to maintain.
• Comes with Ø63mm to Ø50mm fittings, 1 h” female threaded.

Description:

Air is sucked in from the outside, through venturi, into the space between the UV-C lamp and quartz sleeve. The 1 85mm radiation converts the available oxygen into ozone. The produced ozone is mixed with water through the venturi to perform its disinfection and oxidising job.

Features:

• This unit provides triple disinfection: ozone, OH radicals and UV-C. A built-in electronic ballast to ensure an efficient and stable power supply.
• 100% effective and constant operation.
• The ozone UV-C lamp produces ozone for 4.500 hours and produces UV-C for 9.000 hours.
• The device will indicate when the lamp needs replacing.
• Easy installation and maintenance.

Description:

For the VGE Pro UV-c systems different control units are available, knowing: Basic, control timer, control monitor and control monitor Plus. The Basic version is suited with an electronic ballast to drive the lamp(s). The control timer has additionally a LED display for showing the operational lamp hours. The control monitor has a colour display and an optional UV sensor can be connected for monitoring the treatment process. The most complete control panel is the control monitor Plus. A UV sensor, temperature sensor and a flow switch can be connected and the control unit has alarm and warning functions built-in.

Features:

• The high quality 316L stainless steel reactor of the VGE Pro INOX series have been designed to perform.
• After the high quality welding process the units are leak tested.
• After this process they get a pickling and passivation treatment which drastically improves the corrosion resistance and lifetime of the unit.
• Another last treatment with glass pearls (shot peening) gives the units a nice, matt grey surface.